To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna Pressure Washer and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | Pressure Washer |
| Category | Pressure Washer |
| Language | English |
Provides details on the pressure washer's features and specifications.
Explains safety symbols, signal words, and hazard definitions.
Details hazards associated with engine exhaust gases and carbon monoxide.
Covers risks related to flammable fuel, electrical shock, and slippery surfaces.
Warns about the dangers of the high-pressure water stream and potential injuries.
Addresses safety during maintenance, entanglement, and eye injury risks.
Instructions for removing and checking all components from the packaging.
Detailed instructions for assembling the wheel kit and moving the unit.
Steps for connecting the negative battery cable for electric start.
Procedure for filling the engine crankcase with oil and the fuel tank with gasoline.
Explains O-ring lubrication and how to use the battery charger.
Steps to connect hoses, water supply, and perform essential pre-start checks.
Identifies and describes key parts like spray gun, hoses, and levers.
Recommends outdoor placement and adequate ventilation for safe operation.
Step-by-step guide for starting the engine, including electric and manual methods.
Procedures for safely shutting down the unit and storing accessories.
Instructions on changing spray tips and setting up detergent application.
Process for rinsing surfaces and explanation of the pump cool down system.
Outlines routine maintenance tasks and essential pre-operation inspections.
Guidelines for battery care and cleaning the fuel valve system.
Procedures for cleaning debris, inlet screens, and inspecting hoses.
Inspecting detergent tubes, check ball, and the spray gun.
Cleaning clogged spray tips and information on O-ring replacement.
Steps for draining and refilling the pump with the correct oil.
Procedures for changing engine oil and servicing the air cleaner.
How to service the spark plug and inspect the muffler and cooling system.
Information on carburetor settings and when to contact a service dealer.
Steps to flush the system and prepare the unit for immediate storage.
Protecting the unit from freezing temperatures to prevent damage.
Preparing the engine and pump for storage longer than 30 days.
Using PumpSaver or antifreeze and general storage advice.
Diagnosing and correcting pump performance issues and detergent mixing failures.
Troubleshooting engine bogging, power loss, and starting difficulties.
Explains the warranty for emissions-related parts and systems.
Outlines the owner's duties for maintaining warranty coverage.
Details the general limited warranty period, coverage, and exclusions.
Lists key performance metrics like outlet pressure and flow rate, and engine details.
Lists part numbers for common replacement items like PumpSaver and air filters.
