OPERATION
35
Stopping the Engine
Move the throttle to the minimum position (tortoise
symbol). If the engine has been worked hard,
allow it to idle a minute in order to attain a normal
operating temperature before stopping. To prevent
fouling the spark plugs, avoid idling the engine for
longer periods.
• Disengage the mower deck by depressing the
blade switch.
8061-013
Disengage the mower deck and move throttle to minimum
• Raise the mower deck by pressing the foot
pedal forward to the transport position.
• When the machine is standing still, activate the
parking brake by pulling the lever upward.
• Turn the ignition key to the stop position.
• Move the steering controls outward.
• Remove key. To prevent unauthorized use,
always remove key when leaving the mower.
8065-016
Raise deck to transport position
8065-018
Place controls in neutral position to stop
To Next Page
Loading...
