Husqvarna Rider 216 User Manual

2 – English
KEY T O SYMBOLS
Symbols
These symbols are on the machine and in the instr uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Neutral
Fast
Slow
Stop the engine.
Battery
Choke.
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Hydrostatic freewheel
Watch your hands and other body parts
so they do not get caught and crushed
between the belt and belt pulley.
Warning: rotating parts. Keep hands and
feet clear.
Parking brake
Brake
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in the Technical data chapter and
on the label.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine
or equipment
Drive very slowly if no cutting unit is fitted
Before and during reversing procedures,
look behind you.
>10

Husqvarna Rider 216 Specifications

General

Engine Manufacturer	Briggs & Stratton
Cylinder Displacement	500 cm³
Cylinders	1
Fuel Type	Gasoline
Fuel Tank Volume	12 L
Cutting Width	94 cm
Cutting Height Min	25 mm
Cutting Height Max	75 mm
Transmission Type	Hydrostatic
Drive Method	Rear-wheel drive
Engine Cooling	Air
Oil Filter	Yes
Battery Type	Lead-Acid
Battery Capacity	24 Ah
Uncut Circle	30 cm
Blade Engagement	Automatic
Blades	3
Speed Forward Min-Max	0-9 km/h
Speed Reverse Min-Max	0-9 km/h
Transmission Manufacturer	Tuff Torq
Transmission Model	K46
Seat Type	Comfort
Seat Back Height	High
Hour Meter Type	Digital
Service Interval Indicator	Yes
Pivoting Rear Axle	Yes
Headlights	Yes
Parking Brake Type	Disc
Cutting Methods	Rear discharge
Tires Rear	16x6.5-8"