Husqvarna Rider Pro 15 User Manual

English – 39
MAINTENANCE
Checking the blades
To achieve the best mowing results it is important
that the blades are undamaged and well-
sharpened.
Check that the blades’ attachment screws are tight.
IMPORTANT INFORMATION
Replacing or sharpening the blades should
be conducted by an authorised service
workshop.
IMPORTANT INFORMATION
On the Bioclip unit the relative positioning
of the blades should always be as shown
in the diagram with an angle of 90°
between the blades. Otherwise the blades
can go against each other and damage
the unit.
BioClip103
Cutting unit with rear ejection
BioClip 90Cutting unit with side ejection
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the
servicing dealer judge whether the blade can be
repaired/ground or must be discarded.
6017-162 6017-108
6017-020
6017-149
8009-288
Combi 112

Husqvarna Rider Pro 15 Specifications

General

Engine Manufacturer	Briggs & Stratton
Net Power rpm	3000 rpm
Transmission Type	Hydrostatic
Cutting Width, max	112 cm
Engine Power	15 hp
Fuel Type	Gasoline
Transmission	Hydrostatic
Turning Radius	30 cm
Deck Material	Steel
Max Speed	9 km/h
Fuel Tank Volume	12 liters