Husqvarna SG13 - Lubrication; Right Wheel; Cutter Wheel Bearing

LUBRICATION
37
Cutter Wheel Bearing
Lubricate using a grease gun, one pump after each
use.
Use good quality MP grease. Grease from well-known
brand names (petrochemical companies, etc.) usually
maintains a good quality.
8011-231
Right Wheel
Some models may require lubrication of the right
wheel. Lubricate using a grease gun until the grease
squeezes out one nipple.
Use good quality MP grease. Grease from well-known
brand names (petrochemical companies, etc.) usually
maintains a good quality.
8011-231