TECHNICAL DATA
41
SG13HB CE / 966042701
Engine
Manufacturer Honda
Cylinder Volume 337 cc (20.6 cu in)
Power 13 hp (9.2 kW at 3600 RPM)*
Torque 17.36 ft/lb / 23.54 Nm at 2500 RPM
Idling speed 1250-1550 RPM
Oil capacity including filter 2.2 qt / 2.1 liter
Spark plug NGK BP6ES or BPR6ES
Fuel tank volume 1.7 gal. / 6.5 L
Chassis
Tires 4.10-6 (12" pneumatic)
Brake Disk - Lever activated
Drive Direct
Belt Dayco double V-belt
Clutch Amsbeck or Noram centrifugal clutch
Cutting Wheel 14" dia. x
3
/8" thick disc (157.5 mm x 9.5 mm)
Cut Depth Approx 10" (25.4 cm)
Dimensions
Length 62"- 73" (157- 185 cm) depending on handle position
Width 27" (69 cm)
Height 24"- 43" (61 - 109 cm) depending on handle position
Weight 249 lb. (112.9 kg)
Vibration
Daily Exposure
Hand/Arm - A(8) 2.81 m/s
2
Equivalent Vibration
Hand/Arm - a
hv,eq
3.97 m/s
2
Standard Deviation
Hand/Arm - a
hv,eq
0.4 m/s
2
*The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this
value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental
conditions and other variables.
To Next Page
Loading...
