To prepare your product for long-term
storage
1. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION: If the saw chain and guide
bar are not cleaned, they can become
rigid or blocked.
2. Attach the transportation guard.
3. Clean the product. Refer to
Maintenance on page 17
for instructions.
4. Do a complete servicing of the product.
Technical data
Technical data
Husqvarna T525
Engine
Cylinder displacement, cm
3
27.0
Idle speed, rpm 2900
Maximum engine power acc. to ISO 8893, kW/hp @ rpm 1.1/1.5@9500
Ignition system
1
Spark plug NGK CMR6A
Electrode gap, mm 0.75
Fuel and lubrication system
Fuel tank capacity, liter/cm
3
0.19/190
Oil tank capacity, liter/cm
3
0.17/170
Type of oil pump Adjustable
Weight
Weight, kg 2.7
Noise emissions
Sound power level, measured dB(A) 110
Sound power level, guaranteed L
WA
dB(A) 111
Sound levels
2
Equivalent sound pressure level at the operator’s ear,
dB(A)
98
Equivalent vibration levels, a
hveq
3
1
Always use the recommended spark plug type. Use of the incorrect spark plug can cause damage to the pis-
ton/cylinder.
2
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 1 dB (A).
3
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
2
.
1007 - 003 - 28.08.2019 29
To Next Page
Loading...
