Husqvarna T535i XP - Accessories

Accessories
Guide bar and saw chain combinations
The following cutting attachments are approved for
Husqvarna T535i XP.
Guide bar Saw chain
Length, in Chain pitch, in Gauge, mm Max. nose radius Type Length, drive
links (no.)
10 3/8 1.1 7T Husqvarna H38 40
12 9T 45
14 52
10 0.325 mini 1.1 8T Husqvarna
SP21G
46
12 51
14 59
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
38
11/64 in /
4.5 mm
75° 30° 0°
0.025 in/
0.65 mm
5056981-03 5795588-01
21
5/32 in / 4.0
mm
60° 30° 0°
0.025 in/
0.65 mm
5950046-01 5950047-01
Approved batteries
Only use original BLi batteries for this product.
959 - 006 - 15.05.2019 29