Husqvarna TC 242T User Manual

Product overview
1
2
7
10
3
4
5
6
11
8
9
1. Light switch
2. Throttle control
3. Hour meter
4. Attachment clutch control
5. Ignition switch
6. Parking brake lever
7. Brake pedal
8. Forward drive pedal
9. Reverse drive pedal
10. Attachment lift lever
11. Freewheel lever
Symbols on the product
Warning! Be careful and use the
product correctly. This product can
cause serious injury or death to the
operator or others.
CAUTION: Incorrect use can result in
damage to the product or personal
property.
Read the operator's manual carefully
and make sure that you understand
the instructions before you use this
product.
Reverse.
Neutral.
High.
Low.
2009 - 003 - 10.04.2023 3

Husqvarna TC 242T Specifications

General

Engine Manufacturer	Briggs & Stratton
Cylinder Displacement	656 cm³
Cylinders	2
Transmission Type	Hydrostatic
Transmission Manufacturer	Tuff Torq
Cutting Width	107 cm
Collector Volume	320 l
Oil Filter	Yes
Nose Roller	Yes
Seat Material	Vinyl
Seat Back Height	High
Hour Meter Type	Digital with pre-programmed service intervals
Mulch Kit	Included
Fuel Tank Volume	11.5 L
Cutting Methods	Collect, Mulch, Side discharge
Engine Lubrication Type	Full pressure
Front Tire Size	15x6-6
Wheelbase	121.9 cm