Technical data
TC 242T
Engine
Engine brand LCC
Engine model LC2P80
Nominal engine output, hp / kW
1
19.4 / 14.5
Max. engine speed, rpm 2600 ± 100
Engine idle speed, rpm 1750 ± 100
Maximum speed forward, mph / km/h 4.16 / 6.7
Maximum speed reverse, mph / km/h 2.2 / 3.5
Fuel, minimum octane grade, lead-free, max 10%
Ethanol and max 15% MTBE, AKI / RON
87 / 91
Fuel tank volume, gallons / l 2.5 / 9.46
Oil type above 32°F / 0°C (API: SJ-SN): SAE 30
Oil type below 32°F / 0°C (API: SJ-SN): SAE 5W30
Oil volume with oil filter, oz / l 80 / 2.37
Oil volume without oil filter, oz / l 72 / 2.13
Lubrication system Pressure with oil filter
Cooling system Air cooled
Air filter Dual
Alternator, V. amp. @ 3600 rpm 12 V 15 amp @ 3600 rpm
Start motor Electric start 12 V
Weight
Weight, with empty tanks, lb / kg 633 / 287
Cutting deck
Number of blades 2
Blade length, in. / cm 21.8 / 55.37
Cutting Width, in. / cm 42.5 / 108
Cutting Height, in. / cm 1.5-3.8 / 3.8-10.2
Tires
Tire pressure, rear – front, PSI / kPa / bar 15 / 103 / 1
Front tires, in. 15 x 6-6
Rear tires, turf pneumatic, in. 18 x 8.5-8
1
The power rating as declared by the engine manufacturer is the average gross power output at the
specified RPM of a typical production engine for the engine model measured using SAE Standards for
engine gross power. Refer to the engine manufacturer engine specifications.
40 2009 - 003 - 10.04.2023
To Next Page
Loading...
Need help?
General
