EasyManuals Logo

Husqvarna TC 85 2023 User Manual

Husqvarna TC 85 2023
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
SERVICE WORK ON THE CHASSIS 11
69
H02532-01
Check that the chain guide is firmly seated.
» If the chain guide is loose:
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
M6 10 Nm (7.4 lbf ft)
Remaining nuts,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
Remove the motorcycle from the lift stand. ( p. 45)
11.39 Checking the frame
V00858-01
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deforma-
tion:
Change the frame.
Guideline
Repairs on the frame are not permitted.
11.40 Checking the link fork
V00857-01
Check the link fork for damage, cracking, and deformation.
» If the link fork shows signs of damage, cracking, or defor-
mation:
Change the link fork.
Info
Always replace a damaged link fork. Husq-
varna Motorcycles does not permit repairing
link forks.
11.41 Checking the throttle cable routing
Warning
Danger of accidentsThe throttle cable can become kinked, trapped or blocked if it is not routed cor-
rectly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
Preparatory work
Remove the seat. ( p. 57)
Remove the air filter box cover. ( p. 57)
Remove the right side cover. ( p. 61)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna TC 85 2023 and is the answer not in the manual?

Husqvarna TC 85 2023 Specifications

General IconGeneral
BrandHusqvarna
ModelTC 85 2023
CategoryMotorcycle
LanguageEnglish

Related product manuals