Husqvarna V 554 - Page 20

MAINTENANCE
DAILY
AT
LEAST
ONCE
EACH
YEAR
MAINTENANCE
INTERVAL
IN HOURS
BEFORE AFTER 50 250 500
CHECK
Throttle and choke cables for adjustment
■
Mower deck for adjustment
● ●
Condition of belts, belt pulleys
● ●
Caster wheels (every 200 hours)
● ●
Hydraulic oil level
●
Engine valve clearance
4)
♦ ♦
CHANGE
Spark plugs
■ ■
Engine oil
1)
■ ■
Engine oil lter
■ ■
Fuel lter
■ ■
Paper air lter
2)
■ ■
Air cleaner foam pre-lter
2)
■
Air cleaner paper lter cartridge
2)
■ ■
Hydraulic oil
3)
● ● ●
Hydraulic oil lter
3)
● ● ●
ALSO
Dismantle and inspect starter
4)
♦
Perform the 500-hour service
4)
♦ ♦
1)
First change after 8–10 hours. When
operating with a heavy load or at high ambient
temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement
are required more often.
3)
Maintenance interval determined by type of
oil used. See Qualied Hydraulic Oils in the
Lubrication section.
4)
Performed by authorized service workshop.
● = Described in this manual
♦ = Not described in this manual
■ = Refer to the engine manufacturer’s manual
Hardware
Check daily. Inspect the entire machine for loose
or missing hardware.
WARNING! Do not short battery
terminals by allowing a wrench or other objects
to contact the two terminals at the same time.
Before connecting battery, remove metal
bracelets, wristwatch bands, rings, etc.
Positive terminal must be connected rst to
prevent sparks from accidental grounding.
20
MAINTENANCE