To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna V 548 and is the answer not in the manual?
General| Deck Material | Steel |
|---|---|
| Engine Manufacturer | Briggs & Stratton |
| Engine | Briggs & Stratton |
| Weight | 560 lb |
| Cutting Height | 1.5 - 4 in |
Details conformity requirements for the USA, including California emission rules.
Welcome message and thanks for purchasing the Husqvarna stand-on mower.
Defines terms and notes on product changes and operating direction.
Guidance on road transport regulations, fastening equipment, and prohibition on public roadways.
Specifies intended use for lawns and even ground, following manufacturer directions.
Explains the dual use as a stand-on or walk-behind unit with platform latch.
General safety instructions and warnings about cutting machine hazards and child safety.
Precautions to prevent accidents involving children near the mower.
Guidelines for safe operation, including understanding manual, operator responsibility, and avoiding hazards.
Careful operation on slopes to prevent loss of control and tip-over accidents.
Precautions for handling flammable gasoline to avoid injury and property damage.
Safety precautions for maintenance, including ventilation, tightening hardware, and safety device checks.
Guidelines for safe transport, including checking connections, avoiding spills, and handling batteries.
Information on spark arrestor requirements for specific land types and its maintenance.
Explanation of how the two steering controls affect direction and speed.
Details on the left steering control acting as the Operator Presence Control (OPC) for operation.
Function of the ignition switch for starting and stopping the engine.
How the throttle control regulates engine speed and blade rotation.
Use of the choke control for cold starts to provide a richer fuel mixture.
Operation of the blade switch to engage and disengage mower blades.
Location and function of the fuel gauge on the control panel.
Location and function of the service meter showing total operating time.
Location of the fuse box and type of fuses used.
Description and purpose of stationary bars on the control panel.
Operation of the deck lift lever for adjusting cutting height.
Function of the transport latch for setting deck height and releasing it.
Location and operation of the park brake lever.
Fuel tank capacity, safety instructions for refueling, and fuel type recommendations.
Function of the hydraulic release lever for moving the mower by hand.
Location and operation of the fuel shut off valve.
Guidance for new users on mower maneuverability, steering, and initial operation.
Checks before starting, engine starting, running, and stopping procedures.
Tips for mowing, operating on hills, and general operation safety.
Careful operation on slopes to prevent loss of control and tip-over accidents.
Procedure for manually moving the mower when the engine is not running.
Procedure for adjusting the unit's tracking and speed for straight operation.
Overview of maintenance tasks, schedules, safety system, and battery access.
Instructions for checking the machine for loose or missing hardware.
Explanation of the safety system preventing starting or driving under certain conditions.
Procedure for lowering or removing the operator cushion for access.
Instructions for using jumper cables to charge or start the engine.
Steps for removing, cleaning, and replacing the mower battery.
Guidance on checking V-belts for cracks and nicks.
Procedure for installing and tensioning the deck drive belt.
Detailed steps for installing and tensioning the deck belt.
Information on replacing and reinstalling the pump belt.
Recommended tire pressure for all tires and warning about tire liners.
Procedure for leveling the mower deck for optimal cutting performance.
Steps for removing, installing, and torquing mower blades.
Explanation and adjustment of anti-scalp rollers for terrain conditions.
Procedure for visually checking and adjusting the park brake mechanism.
Procedure for adjusting the neutral position of the pump controls.
Adjusting neutral bolts to ensure proper switch function for starting.
Procedure for checking and replacing caster wheels.
Guidelines for regular cleaning and washing of the mower deck and components.
Schedule for lubrication points and intervals based on operating hours.
General advice on lubrication using engine oil and grease, and cleaning excess.
Recommendations for approved hydraulic oils and their change intervals.
Detailed steps for draining and refilling engine oil.
Greasing front wheel mounts, bearings, and deck spindles.
Checking hydraulic oil level and procedures for oil and filter changes.
Troubleshooting for engine not starting, rough running, weakness, and overheating.
Troubleshooting for battery charging, mower movement, and deck engagement problems.
Troubleshooting for uneven mowing, transaxle oil leaks, and vibrations.
Instructions for preparing the machine for storage, including fuel management and cleaning.
Advice on ordering spare parts and annual service checks.
Details on engine, transmission, frame, cutting, and dimension specifications.
General torque specifications and standards for fasteners.
Tables for US and Metric standard hardware torque values.
Checklist for initial delivery service and customer information.
List of maintenance tasks to be performed after 10 hours of operation.
List of daily maintenance checks for the mower.
List of maintenance tasks to be performed every 50 hours.
List of maintenance tasks to be performed every 250 hours.
List of maintenance tasks to be performed every 500 hours.
List of maintenance tasks to be performed at least once each year.
