Husqvarna V 548 - TECHNICAL DATA - Specifications; Engine and Transmission Specifications

ENGINE
Manufacturer Kawasaki
Type FX751V
Power
18.3 kW
1)
24.5 hp
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 24.6 litres 6-1/2 gallons
Cooling Air cooled
Air lter Heavy duty canister
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission Parker™ 12cc
Steering control Dual levers, foam gripped
Speed forward 0–15.3 km/h 0–9.5 mph
Speed reverse 0–8 km/h 0–5 mph
Brakes Mechanical Park Brake
Front caster tires 13 x 6.5
Rear tires, turf pneumatic 20 x 10-10
Tire pressure 103 kPa / 15 PSI / 1 bar
FRAME
Cutting Width 122 cm 48"
Cutting Height 3.8 cm – 12.7 cm 1-1/2" – 5"
Number of Blades 3
Blade Length 42 cm 16-1/2"
Anti-scalp roller 2 adjustable
Service Meter Digital
Blade Engagement Ogura GT 2.75 Clutch
Deck Construction 7 gauge fabricated
Productivity
14, 973 m
2
/h
3.7 acres/h
DIMENSIONS
Weight 517 kg 1,140 lb
Base Machine Length 145 cm 57"
Base Machine Height 145 cm 57"
Base Machine Width 120 cm 47"
Overall Width, Chute Up 127 cm 50"
Overall Width, Chute Down 158 cm 62"
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
33
TECHNICAL DATA