EasyManua.ls Logo

Husqvarna AUTOMOWER 260 ACX User Manual

Husqvarna AUTOMOWER 260 ACX
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
husqvarna auTOMOWEr
®
TEchnical Manual

Table of Contents

Other manuals for Husqvarna AUTOMOWER 260 ACX

Question and Answer IconNeed help?

Do you have a question about the Husqvarna AUTOMOWER 260 ACX and is the answer not in the manual?

Husqvarna AUTOMOWER 260 ACX Specifications

General IconGeneral
Cutting Width24 cm
Battery TypeLi-Ion
Battery Voltage18 V
Cutting Height20-60 mm
Maximum incline within the working area45%
Sound level Measured58 dB(A)
Blade Type3 pivoting blades
Slope Handling45%
Rain SensorYes
Working Time60 minutes
Anti-Theft SystemPIN code

Summary

1. Function

1.3 Technical Data Specifications

Detailed specifications for different Automower models including dimensions, electrical, noise, and mowing.

1.7 Loop System Control Signals

Explains the A, F, and N signals used for area demarcation and mower guidance.

1.12 Battery Performance and Charging

Details battery charging, temperature, currents, and capacity considerations.

1.13 Mower Sensors

Introduces collision, tilt, lift, and ultrasonic sensors and their functions.

3. INSTALLATION

3.1 Charging Station Placement

Guidance on optimal placement and installation of the charging station for best performance.

3.2 Boundary Wire Installation

Explains requirements and methods for laying the boundary wire.

3.3 Guide Wire Installation

Details the necessity and installation of guide wires for improved navigation.

3.4 Installation Testing Procedures

Describes using Test IN and Test OUT functions to verify installation correctness.

3.10 Installation Examples and Settings

Provides examples of approved/non-approved installations with recommended settings.

4. AUTOCHECK, SERVICE PROGRAM

4.1 Autocheck Software Installation

Step-by-step guide for installing the Autocheck service program on a PC.

4.2 Autocheck Operation Guide

Instructions on connecting the mower, starting Autocheck, and basic operation.

5. REPAIR INSTRUCTIONS

5.1 Mower Body and Chassis Dismantle/Assemble

Detailed steps for disassembling and reassembling the mower's body and chassis.

5.3 Charging Station Circuit Card Replacement

Details the process for replacing the circuit card in the charging station.

5.5 Charging Station Contact Strip Replacement

Instructions for replacing worn contact strips to ensure proper charging.

5.8 Control Box Replacement

Details replacing the mower's control box, including data saving and transfer.

5.15 Mower Battery Replacement

Detailed instructions for replacing the main battery in the mower.

5.18 Blade Motor Replacement

Step-by-step guide for replacing the mower's blade motor.

5.19 Wheel Motor Replacement

Instructions for replacing the mower's wheel motors.

5.23 Loop Signal Checking and Diagnosis

Procedures for checking loop signal strength and diagnosing loop issues.

6. TROUBLE SHOOTING

6.1 Automower Fault Messages

Lists all possible fault messages, their causes, and recommended actions.

6.2 Common Fault Symptoms

Describes common operational faults grouped by situation (mowing, searching, docking, etc.).

Related product manuals