Husqvarna AUTOMOWER 260 ACX - The Tools Menu; Discover the PIN Code

28 - English
2. SPECIAL MENU FUNCTIONS
The sensors display mode presents:
• Collision:
To test the collision sensors: Hold the handle on
the underside of the Automower
®
. Press on
different parts of the body. The display shows
None, Both, Left or Right. Continue to press on
the body until you see that both collision sensors
work.
• Lift:
To test the lift sensor, lift up the front part of the
body. When the body is lifted up, the lift sensor is
activated and YES is shown on the mower's
display. When the mower is in the lowered position
NO is shown.
• Tilt X and Tilt Y:
When Automower
®
is horizontal the values should
be max ±3. Inclination up and to the left give a
negative values.
• Mower position:
States Mower normal pos. or: Mower reversed.
• Ultrasonic (only 260 ACX):
Indicates mower's distance to closest obstacle. A
correct value is between 40 and 300 cm (16” and
120”).
2.3 Discover the PIN code
If you forget the PIN code for an Automower
®
or when
a mower is blocked because an incorrect code has
been stated, you can find out the right code:
1. In input mode for the PIN code, or when the main
menu is displayed: Hold down the 9 key for five
seconds, a combination of five letters will then be
displayed.
2. Contact the national service organisation and
state the letter combination. They can then
identify the right PIN code.
3. Press Arrow back to exit the function.
2.4 The Tools Menu
Over and above the menus described in the operator's
manual for Automower
®
, there is another menu called
Tools. This is found on the Expert user info level. The
menu Tools contains, among others, the possibility to
test components of a mower and information about
different operating data.
To show the Tools menu:
1. Place the cursor on Settings and press YES.
2. Press the Home, 4 and 3 buttons simultaneously,
i.e. at the same time but in the stated order.
Collision:
Lift:
Tilt X: 0
Mower normal pos.
Ultrasonic distance:
NONE
NO
Tilt Y: 0
57 cm
Example: 260 ACX
Settings
Security
Sounds
Language
Time and date
4-1