Husqvarna WS 482 HF User Manual

WS 482 HF
EN Operator's manual 2-24
ES-MX Manual de usuario 25-49
FR-CA Manuel d’utilisation 50-74
To order go to Discount-Equipment.com

Husqvarna WS 482 HF Specifications

General

Brand	Husqvarna
Model	WS 482 HF
Category	Saw
Language	English

Summary

Introduction

Product description

Husqvarna WS 482 HF is a wall saw with an electric motor.

Intended use

This product is intended for sawing in hard materials such as reinforced concrete, stone and brick.

Product overview

Product overview, remote control

Type plate

Product liability

Safety

Safety definitions

Explains the meaning of warnings, cautions, and notes used in the manual.

General power tool safety warnings

Provides general safety advice applicable to all power tools.

Work area safety

Details safety precautions for maintaining a safe operating environment.

Electrical safety

Outlines critical safety measures related to electrical hazards.

Personal safety

Emphasizes operator awareness, alertness, and the use of protective equipment.

Power tool use and care

Offers guidance on proper usage, maintenance, and tool care to prevent accidents.

Safety instructions for wall saws

Provides specific safety guidelines for operating wall saws.

Personal protective equipment

Details essential personal protective equipment (PPE) for safe operation.

General safety instructions

Covers broad safety principles and product-specific precautions.

Safety instructions for operation

Specifies crucial safety rules to follow during product operation.

Safety devices on the product

Blade guard

Ensures dust containment and protects against blade breakage.

Blade guard lock

Maintains the correct position of the blade guard guide.

End stops

Power pack

Wall supports

To do a check of the wall supports

Verifies the correct positioning and attachment of wall supports.

Rail connectors

To do a check of the rail connectors

To do a check of the machine stop buttons

Assembly

Introduction

Emphasizes understanding safety before commencing assembly.

To do a check of the work area before operation

Ensures the work area is safe and suitable for operation.

To do a function check before operation

Confirms that all safety devices and components function correctly.

To assemble the wall supports

To assemble the product on the rails

To assemble the blade

To assemble the blade

Detailed steps for attaching the blade, flanges, and hub.

To assemble the blade for flush cutting

Specific instructions for blade assembly for flush cutting operations.

To assemble the blade guard

To connect the power pack

To disassemble the product

Operation

Introduction

Stresses the importance of safety knowledge before operation.

To adjust the blade guard guide

Details how to adjust the blade guard guide for optimal performance.

To adjust the guide wheels

Guides on adjusting the guide wheels for smooth operation.

To adjust the lock handle on the blade guard guide

Explains how to correctly adjust the blade guard guide lock.

To adjust the saw carriage

To cut concrete blocks

Blade drive modes

To start the product

To select gear

To operate the remote control

To calibrate the arm position

To set blade diameter

To set drive mode

To set rotation direction

To operate the product

To stop the product

Maintenance

Introduction

Emphasizes safety precautions before performing maintenance.

To do daily maintenance on the product

Routine maintenance tasks to ensure product longevity.

To clean the product

Guidelines for cleaning the product effectively and safely.

To do servicing on the product

Information on professional servicing and recommended intervals.

Transportation, storage and disposal

Transportation

Instructions for safely moving the product.

Storage

Guidelines for secure and appropriate storage of the product.

Disposal

Information on environmentally responsible product disposal.

Technical data

Recommended blade speed

Lists recommended blade speeds for different blade sizes and materials.

Product dimensions