To Next Page
S
Sarah JohnsonAug 3, 2025
Why is my Husqvarna WS 482 HF blade polishing instead of cutting?
- PPatrick SchmidtAug 3, 2025
If your Husqvarna Saw blade is polishing instead of cutting, there are several potential reasons: * The cutting depth might be too large. Try decreasing the cutting depth. * The blade speed could be too high. Decrease the blade speed. * Excessive water flow to the blade can also cause this issue. Reduce the water flow. * The blade might be too hard for the material you're cutting. Consider switching to a softer blade.
General
