Huvitz HOCT-1F/1 User Manual (English)

Other manuals for Huvitz HOCT-1F/1

Questions and Answers:

P
Paul WhiteAug 4, 2025
What to do if captured image is dark on Huvitz HOCT-1F/1 Medical Equipment?
- E
  Elizabeth ClarkAug 4, 2025
  If the captured image from your Huvitz Medical Equipment appears dark, it could be due to a couple of reasons. First, ensure that the alignment and focus on the anterior eye front are properly adjusted by manipulating the joystick to align the working dot to the center of the target mark. Second, the amount of light for image capture may not be sufficient, so try increasing the flash intensity.
M
morganmillerAug 9, 2025
Why is the captured image quality low on Huvitz HOCT-1F/1?
- A
  Andrea FrenchAug 9, 2025
  If the quality of the captured image from your Huvitz Medical Equipment is low, it may be because the objective lens or the lens of the Anterior segment adapter is contaminated, so perform the cleaning. Another potential reason is that the patient’s eyelid or eyelashes may be interfering with image capture. In this case, ask the patient to open their eyes wider or, carefully lift the patient’s lid, ensuring not to press against the eyeballs.
R
Richard WilsonAug 14, 2025
How to fix the screen if it does not turn on for Huvitz HOCT-1F/1?
- K
  Kristin BarronAug 14, 2025
  If the screen of your Huvitz Medical Equipment does not turn on, start by checking the connection of the power cable. Also, ensure that the power switch is turned on.
J
Judith AndrewsAug 19, 2025
What to do if Huvitz HOCT-1F/1 cannot capture the intended part image?
- J
  John WaltersAug 19, 2025
  If the image of the intended part cannot be captured with your Huvitz Medical Equipment, first, ensure that the patient is looking at the fixation target at the time of image capture by instructing them to focus on it. If that’s not the issue, the intended part may be outside the range for image captures, in which case you should insert a compensation lens.
M
Mrs. Courtney BrownAug 25, 2025
What to do if Huvitz HOCT-1F/1 Medical Equipment screen doesn't turn on but system power is on?
- C
  Clinton ReevesAug 25, 2025
  If the screen of your Huvitz Medical Equipment does not turn on even though the system power is on, the system may be in sleep mode. Restore the system from sleep mode by touching the screen.
E
Emily KingAug 29, 2025
Why is the internal fixation target blurred on Huvitz HOCT-1F/1 Medical Equipment?
- J
  John DawsonAug 29, 2025
  If the internal fixation target of your Huvitz Medical Equipment is blurred, it might be due to the presence of a compensation lens. Remove the compensation lens to resolve this issue.