Need help?Do you have a question about the Huvitz HS-7500 and is the answer not in the manual?
General| Type | Slit Lamp Microscope |
|---|---|
| Magnification | 6x, 10x, 16x, 25x, 40x |
| Slit Width | 0 ~ 14 mm continuous |
| Filters | Cobalt blue, Heat-absorbing |
| Power Supply | AC 100~240V, 50/60Hz |
| Slit Length | 1-14mm in 1mm steps |
Specifies the intended application of the slit lamp in eye examinations.
Details the device's classification regarding electric shock, water ingress, and operation mode.
Explains the importance of safety and adherence to manual instructions for safe operation.
Identifies and explains various safety symbols used on the equipment and in the manual.
Lists environmental conditions to avoid for optimal operation and storage of the equipment.
Provides essential safety measures and guidelines for the correct and safe operation of the device.
Offers a concise overview of the slit lamp's basic functionality and purpose.
Specifies the required environmental conditions for the proper operation of the slit lamp.
Provides step-by-step instructions for the physical assembly of the slit lamp unit.
Explains the procedure for replacing the halogen projection bulb.
Details how to replace the protective fuses in case of electrical issues.
Outlines the recommended methods for cleaning and disinfecting the instrument.
Provides guidance on electromagnetic emissions compliance for the EUT.
Gives guidance on electromagnetic immunity, covering ESD, EFT, Surge, and Voltage dips.
Provides further guidance on electromagnetic immunity, focusing on RF conducted and radiated.
Specifies recommended separation distances for RF communication equipment to maintain EUT performance.
Summarizes the immunity tests, test levels, and compliance levels for the EUT.
Offers final guidance on electromagnetic immunity related to shielded locations and RF shielding.
Displays graphs showing the relative spectral output of the halogen and fixation lamps.
To Next Page
