Need help?Do you have a question about the Huvitz HS-5000 5X and is the answer not in the manual?
General| Brand | Huvitz |
|---|---|
| Model | HS-5000 5X |
| Category | Microscope |
| Language | English |
Specifies requirements for power cords used with the equipment, including voltage and type.
Provides a general description of the slit lamp's function and intended use by ophthalmologists.
Details the device's classification regarding electric shock protection, applied parts, and suitability for flammable environments.
Emphasizes the importance of user familiarity with the manual for safe operation and highlights safety notices.
Explains standard IEC symbols used on medical equipment to classify connections or warn of hazards.
Lists environmental conditions to avoid during operation or storage, such as water, direct sunlight, and extreme temperatures.
Outlines essential safety measures for operating the device, including environmental hazards and user qualifications.
Describes the slit lamp's function for eye examination and its design for diagnostic procedures.
Specifies the required environmental conditions for operation, shipping, and storage, including temperature and humidity.
Guides the user through the step-by-step process of assembling the slit lamp instrument.
Provides instructions on how to safely replace the halogen projection bulb of the slit lamp.
Details the procedure for replacing the protection fuses located on the back of the SMPS unit.
Explains the recommended methods for cleaning and disinfecting the slit lamp to maintain hygiene and functionality.
Declares the electromagnetic emissions compliance of the EUT and guidance on its intended electromagnetic environment.
Provides guidance and declarations regarding the equipment's immunity to ESD, transients, and surges.
Details guidance and declarations for RF immunity, including conducted and radiated RF emissions.
Advises on minimum separation distances for RF communication devices to prevent interference with the EUT.
Summarizes the immunity test levels and compliance levels for conducted and radiated RF.
Offers guidance on using shielded locations and managing RF interference for the EUT.
To Next Page
