Huvitz HS-5000 5X - EMC Information; Electromagnetic Emissions Guidance

-------------------------------------------------------------------------------------SLIT LAMP HS-5000 5X 33
11. EMC Information
11.1. Guidance and manufacturer’s declaration – electromagnetic
emissions
The EUT is intended for use in the electromagnetic environment specified below.
The customer or the user of the EUT should assure that it is used in such an
environment.
Immunity test Compliance Electromagnetic environment -
guidance
RF Emissions
CISPR 11
Group 1 The EUT uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment
RF Emissions
CISPR 11
Class B The EUT is suitable for use in ail
establishments, including domestic
establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings
used for domestic purposes
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations/
Flicker emissions
IEC 61000-3-3
Complies