Huvitz HS-5000 5X - Replacing Protection Fuses

-------------------------------------------------------------------------------------SLIT LAMP HS-5000 5X 31
10.2. Protection fuses replacement
To replace the fuses proceed as follows:
z The protection fuses are placed on the back of the SMPS, and inserted power
socket. Before doing anything else, disconnect the plug from the main supply
socket
z Remove the burned-out fuses
z Substitute the fuses and check
z Replace the plug in the main supply socket.
Replace fuses with the same rating and type(250Vac, T2.0AL)
!
CAUTION
[ Figure 8. Replace the fuse ]