Huvitz HS-7500 - 11.4. Recommended Separation Distances between Portable and Mobile RF Communications Equipment

40
SLIT LAMP HS
-
7
5
00
-------------------
--
--------------------------------------------------------------
11.4.
Recommended separation distances between portable and
mobile RF communications equipment and the EUT
The is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user the EUT can
help Prevent
electromagnetic interference by maintaining a minimum nce between portable
and mobile RF communications equipment (transmitters) the EUT as
recommended below, according to the maximum output power of the communications
equipment.
Ra
ted
maximum
output power
of transmitter
[W]
Separation distance according to frequency of transmitter
[m]
150kHz to 80MHz
80MHz to
800MHz
800MHz to
2.5GHz
V
1
=3Vrms
E
1
=3V/m
E
1
=3V/m
0.01
0.116
0.1166
0.2333
0.1
0.368
0.3687
0.7378
1
1.166
1.1660
2.3333
10
3.687
3.6872
7.3785
100
11.660
11.6600
23.333
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m)
can be estimated using the
equation applicable to the
frequency of the transmitter, where p is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1) At 80MHz and 800MHz, the separation distance for the higher frequency
range applies.
NOTE 2) T
hese guidelines may not apply in all situations. Electromagnetic
propagation is affected by
absorption and reflection from structures, objects and
people.