General part
• Device Name - The device name (default “STE2 LITE”) helps to differentiate individual
devices in the network.
• WWW Info Text - Text displayed in the footer of the device's web page.
• Temperature Unit - Allows selecting the unit to display temperature - Celsius,
Fahrenheit or Kelvin. The Safe-Range values are automatically calculated based on this
option.
• Periodic Restart - A feature that enables periodic automatic restart of the device to
improve its stability in exposed networks.
• Disable LEDs - Allows disabling certain signaling LEDs on the device, except for those on
the RJ45 connector.
• HTTP Port - The port number on which the embedded WWW server listens, which can be
changed for accessing multiple devices from an external network through a router. The
default port is 80, and setting the value to 0 disables HTTP support.
• HTTPS Port - The port number on which the embedded WWW server listens for secure
HTTPS connections, which can be changed for accessing multiple devices from an external
network through a router. The default port is 443, and setting the value to 0 disables
HTTPS support. It's essential to verify any changes with the network administrator.
Network IPv4 section
The IPv4 parameters of the RJ45 connection. WiFi parameters connection are in the WiFi tab.
• DHCP - Enables the IP address setting function of the DHCP server, if available. Enabling
or disabling DHCP depends on the needs of the user and the network administrator.
• IP Address - The IP address of the device, assigned by the network administrator.
• Network Mask - Network mask, assigned by the network administrator.
• Gateway - IP address of the default gateway, assigned by the network administrator.
• DNS Primary / DNS Secondary - IP address of the DNS server, assigned by the
network administrator.
Device Admin section
• Username / Password - The username and password used to secure access to the web
device environment.
To Next Page
Loading...