HW Group STE2 LITE - Technical Parameters

HW group
36
User Manual for STE2 LITE device
Technical parameters
Ethernet
Interface
RJ45 (10/100BASE-T)
Supported protocols
IP: ARP, TCP/IP (HTTP, HTTPS, SNTP, SMTP, HWg-Push, netGSM, TLS),
UDP/IP (SNMP)
SNMP
Version 1
WiFi
Supported standards
802.11 b/g/n
Frequency
2.4GHz
Output
+19.5 dBm output power in 802.11b mode
+16 dBm for 802.11n
Security
WEP / WPA / WPA2 PSK
Antenna
Internal
External sensors
Port/connector
Port1- RJ11 (1W-UNI)
Values limit
Up to 4 sensor values (°C, %RH, WLD, Voltage ...)
Sensor type
Only sensors from HW group s.r.o.
Sensors/distance
Max 60 meters total length
Power supply
Power voltage
5V / 250 mA
Connector
Connector Jack Ø3.5 x 1.35 / 10 [mm]
LED
Link
Yellow – Ethernet connection state
Activity
Green – Ethernet activity
WiFi
Blue – connection state in operation (shining), search indicator (flashing
slowly) and connecting (flashing quickly)
Button
Reset
Restore default settings: hold and connect power supply, keep holding
button for 5 seconds.
Other parameters
Operating temperature
-10 to 60 °C (device operating temperatures)
Sensors temperature range can be very different
Dimensions/weight
63 x 67 x 29 (WxHxD) / 64g
Elmag. radiation
CE / FCC Part 15, Class B
Elmag. compatibility
EN 61326-1:2013, EN 61010-1:2010, EN 55011:2009, EN 62311:2008