SNMP tab
The SNMP tab configure parameters for Open API - SNMP protocol
SNMP Settings section
• System Name - The name of the device within SNMP.
• System Location - The location of the device within SNMP.
• System Contact - Contact for the device administrator within SNMP.
• SNMP Port - The port number on which SNMP can communicate - 161 by default.
SNMPv1 Access section
• Community - The name of the SNMP community for accessing the device over SNMPv1. 2
communities can be defined. For each Community you can define whether it has
permissions for:
- Read - Enables or disables the read function.
- Write - Enables or disables the write function.
- Enable - Enables or disables a specific community.
To Next Page
Loading...