F. OTHER FEATURES 23
F.07 Caller ID and Smart Redial
If Your system is equipped with Optional Caller ID equipment then incoming calls will
display the number of the calling party on extensions which are ring assigned. Note that not all
incoming calls contain Caller Id information. This is sometimes blocked by the calling party.
The installer of your system may have allocated a key on your extension called CLI Status.
This key when pressed can display the number date and time of the last 10 incoming calls to
your extension. You can view all of these numbers by pressing the VOL UP or VOL DOWN
keys. You may by pressing the Redial key then call that number back.
→ CLI Status. . Press [CLI STATUS] key.
0294150100
02/15 10:20 MISS
. Press [VOL ▲ ] key for next record.
. Press [VOL ▼ ] key for previous record.
. Press REDIAL Key to call back this number.
. Press [TRF/FL] key to delete the current record.
. Press [MIC/AT] key to view the date and time.
. Press [SPK] key to exit the Caller ID mode.
To Next Page
Loading...
