EasyManua.ls Logo

Hyco Accona - Safety Information; General Safety Instructions

Hyco Accona
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Thank you for purchasing a Hyco Accona panel heater. Please ensure you
read and understand these instructions to ensure safe installation and
operation.
The Accona is ideal for a wide range of fixed installation heating applications in the home and
office environment. The Accona is ecodesign compliant; energy saving features include open
window detection and a 24/ 7 electronic timer.
Key Features
Slimline, modern, curved design
24/ 7 electronic timer
Reduced energy wastage with open window detection
Frost protection feature
Full or half power setting
IP24 splashproof
1. Important safety points
The electrical installation must be carried out by a qualified electrician in
accordance with the current edition of the I.E.E. Wiring Regulations.
Only connect the unit to a single-phase supply with a mains voltage as specified
on the rating plate.
If the heater is located in a bathroom, it must be installed so that switches and
other controls cannot be touched by a person in the bath or shower.
Only use the mounting bracket supplied and do not modify the bracket in
any way.
WARNING: To avoid overheating, do not cover the heater.
The supply cord cannot be replaced by the user. If the cord is damaged the
appliance should be returned to the manufacturer or an authorised service
agent for replacement.
The heater must not be located immediately below or above an electrical socket
outlet.

Related product manuals