Boxxer 427 Page 1-3
HydraMaster Corporation
Precautions
A
lthough this unit has been factory adjusted, it may require additional adjustments
to achieve optimum performance, for instance altitude may require carburetor
adjustment and ambient temperatures may require heat control adjustment. When
required, consult an authorized representative.
THROUGH-FLOOR DRILLING: Be cautious when drilling holes through the van
floor. Many vans have critical components mounted directly below the van floor
that could be damaged by a misplaced drill bit. (See Product Support Bulletins
92102, 94062 and 94063 at the end of the manual.)
ENGINE COOLING: Units employing internal combustion engines must not be
enclosed within a van with doors and windows closed. Excessive temperatures
within the engine will result in premature engine failure and a compromise of
applicable warranty.
LEVEL OPERATION: During operation, van or trailer must be parked on level
ground not to exceed + or - 10 degrees. Failure to insure proper leveling may
prevent proper internal lubrication of engine, vacuum and/or high pressure com-
ponents.
MOVING PARTS: Never touch any part of the machine that is in motion. Severe
bodily injury may result.
The machine cannot be run in the IDLE position for cleaning upholstery, carpet or
floor extraction. This will void the warranty.
WARNING
!
CAUTION
!
CAUTION
!
CAUTION
!
WARNING
!
To Next Page
Loading...
