What does it mean when my Hydro-Pro 10 displays a cooling condenser sensor failure?
If your Hydro-Pro Heat Pump shows a cooling condenser sensor failure, it is probably because the sensor is in an open or short circuit. You can check or change the sensor.
Why is the gas return sensor failing on my Hydro-Pro 10?
If the gas return sensor fails on your Hydro-Pro Heat Pump, it is likely due to an open or short circuit in the sensor. You should check or replace the sensor.
What should I do if the ambient temperature sensor fails on my Hydro-Pro Heat Pump?
An ambient temperature sensor failure on your Hydro-Pro Heat Pump usually means the sensor is in an open or short circuit. Consider checking or changing the sensor.
Detailed technical specifications for Hydro-Pro heat pumps across various models.
Criteria and considerations for selecting an optimal location for the heat pump.
Details on voltage, wiring, fuses, and circuit breakers for safe electrical connection.
Procedure for starting up and operating the heat pump for the first time.
Electrical wiring diagram specific to Hydro Pro 5, 7, and 10 models.
Electrical wiring diagram specific to the Hydro Pro 13 model.
Instructions on starting, stopping, setting modes, time, and temperature using the controller.
Lists error codes, their reasons, and corresponding solutions for controller issues.
To Next Page
General
