Need help?Do you have a question about the Hydropool 13FFP Aquaplay and is the answer not in the manual?
General| Heater | 4 kW |
|---|---|
| Control System | Digital |
| Ozone | Optional |
| Shell Material | Acrylic |
| Cover | Included |
| Voltage | 240V |
| Pumps | 1 |
| Filtration System | Cartridge filter |
| Amperage | 30A |
Essential safety warnings and precautions for using the swim spa.
Information on the risks and symptoms of hyperthermia in swim spas.
Guidance on selecting indoor locations for swim spas.
Guidance on selecting outdoor locations for swim spas.
Specific considerations for indoor swim spa installations.
Specific considerations for outdoor swim spa installations.
Guidelines for preparing sites for above-ground swim spa installations.
Guidelines for preparing sites for in-ground swim spa installations.
Information on supporting swim spas without factory cabinets.
Visual examples of swim spa installation configurations.
Guidelines for accessing and protecting swim spa equipment.
Recommendations for optimal placement of swim spa equipment.
Guide for applying Ground Fault Circuit Interrupter and Residual Current Device.
Guidelines for selecting appropriate wire sizes for electrical connections.
Instructions for filling the swim spa with water.
Steps for checking the swim spa after filling.
Procedures for powering up and starting the swim spa.
Steps to prime the pump and release trapped air from the system.
Initial procedures upon powering up the Aquaplay series control system.
Navigating the program menu and setting the clock.
Explanation of buttons and icons on the Aquaplay control panel.
Guide to programming filter and purge cycles on the control system.
Steps for configuring the swim spa's filter cycle settings.
Details on operating pump and lighting systems in the control system.
Explains freeze protection and post-heating cooling process.
Initial procedures upon powering up the Y Series control system.
Instructions for programming the date and time on the Y Series control system.
Explanation of buttons and icons for the 19DTAX Spa control.
Explanation of buttons and icons for Aquasport/Executive Sport controls.
Explanation of buttons and icons for Aquatrainer/Executive Trainer controls.
Operating pump and lighting systems in the control system.
Accessing settings and managing water care modes.
Customizing water care and filtration schedules.
Information on spa filtering and accessing maintenance options.
Understanding and resetting spa maintenance reminders.
Using standby mode and adjusting date/time settings.
Changing temperature units and language settings.
Purge cycles, smart winter mode, and cooling down process.
Steps for installing the home transmitter for the i-Command 2 system.
Steps for installing the spa transmitter for the i-Command 2 system.
Instructions for pairing the home and spa transmitters for i-Command 2.
Understanding the LED indicators for troubleshooting transmitter status.
Information on the RF technology and signal strength of i-Command 2.
How to download and install the i-Command 2 application.
Connecting and using the app via your home network.
Controlling your spa remotely over the internet with the app.
Instructions for setting up Wi-Fi on your device for the i-Command 2 app.
Configuring notification settings for the i-Command 2 application.
The login page for the i-Command 2 application.
Steps for creating a new account for the i-Command 2 application.
Selecting your spa within the i-Command 2 application.
Overview of the i-Command 2 app's main home screen interface.
Using standby mode for spa maintenance tasks.
Procedures for putting the spa into drain mode.
Explanations of various messages displayed on the topside panel.
Operating the variable air therapy system controls.
Maintenance and cleaning instructions for the Bellagio control filter.
Adjusting water flow using diverter valves for user preference.
Adjusting water flow and swim intensity for Aquapro AX current control.
Steps for calibrating the Aquapro self-calibration system.
Overview of the AquaPro EX control system's functions and capabilities.
Navigating the swim experience submenu for training and settings.
Selecting training programs and drills for the AquaPro EX system.
Configuring warm-up, cooldown, step, and preparation times.
Setting up user names and weights for swim profiles.
Viewing swim statistics like calories burned, distance, and time.
Explanation of the Ozone and UV-C sanitization process.
Routine checks and service for the Hydroclear system.
Key factors affecting swim spa water quality and equipment longevity.
Safety precautions for handling spa chemicals.
Steps for filling and balancing the swim spa water initially.
Daily tasks for maintaining the swim spa.
Weekly, monthly, and quarterly tasks for swim spa upkeep.
Care and maintenance recommendations for the safety hard cover.
Instructions for cleaning the swim spa's skimmer basket.
Steps for removing and cleaning the cartridge filter.
Guidelines for cleaning and polishing the acrylic spa surface.
Steps for correctly re-installing the cartridge filter.
Procedures for draining the swim spa water.
Advice on using water softeners and their impact on water balance.
Understanding the indicator for self-clean and eco heat systems.
Recommended methods for cleaning and maintaining the swim spa cabinet.
Techniques for repairing scratches on the cabinet finish.
How to clean and maintain the Soft Stride Floor System.
Guidelines for caring for stainless steel components in the swim spa.
Actions to take during power fluctuations or brown-outs.
Addressing power failures or faults in cold weather to prevent freezing.
To Next Page