How to fix cloudy water in my Hydropool 14IX?
Cloudy water in your Hydropool Hot Tub is often due to microscopic particles that are too small for the filter to catch. To resolve this, test and adjust all water balance elements. You can add a flocculent to help these particles combine so they can be filtered out. Also, consider increasing the filter cycle time.
What to do if I have skin or eye irritation from my Hydropool 14IX Hot Tub?
Skin or eye irritation from your Hydropool Hot Tub is often caused by improper pH and/or total alkalinity levels. Test the water balance and make the appropriate changes to correct these levels.
Why is the pH in my Hydropool 14IX Hot Tub unstable?
An unstable pH in your Hydropool Hot Tub is often due to low total alkalinity levels. Test the total alkalinity levels and, if necessary, increase them with sodium bicarbonate.
Why is the pH in my Hydropool 14IX resistant to changing?
If the pH in your Hydropool Hot Tub is resistant to changing, it's likely due to high total alkalinity levels. Test the total alkalinity levels and, if necessary, decrease them with sodium bisulfate or muriatic acid.
How to remove scale (white/grayish deposit) from my Hydropool 14IX?
Scale, a white or grayish deposit in your Hydropool Hot Tub, is often caused by high calcium hardness. Test the calcium hardness level and treat it with a sequestering agent or perform a partial drain and refill.
What causes discolored water in my Hydropool Hot Tub?
Discolored water in your Hydropool Hot Tub is often caused by the presence of metals in the water, such as iron or copper. Treat the water with a chelating or sequestering agent.
Why is my Hydropool 14IX foaming excessively?
Excessive foaming in your Hydropool Hot Tub can be caused by several factors: * Buildup of body oils or cosmetics: If there's no waterline, use a defoamer to break up contaminants and a clarifier to filter them away. If a waterline is present, draining and cleaning the spa might be necessary. Clean the filter thoroughly after soaking it overnight in bleach. An oil-absorbing sponge can help prevent future occurrences. Increase filter cycle time. * Laundry detergent residual in swimwear: Prevent this by running an extra rinse cycle on your washing machine or re-rinsing swimwear well by hand. * Excess organic contaminants: Use defoamer to break up contaminants, then a clarifier to help filter them away, followed by thoroughly cleaning your filter. If the foaming is excessive, draining...
Introductory message from Hydropool.
Crucial safety precautions for using the swim spa.
Selecting optimal indoor and outdoor installation sites.
Key factors for a successful and safe swim spa installation.
Requirements for preparing the installation site, including base requirements.
Essential electrical safety, GFCI/RCD application, and wire sizing.
Details on optional features like audio, covers, and special systems.
Step-by-step guide for filling, starting, and priming the pump.
Understanding control panels, temperature settings, and jet functions.
Maintaining proper water chemistry and safe chemical handling.
Solutions for common water balance issues.
Daily, weekly, monthly, and quarterly maintenance tasks, filter cleaning.
Steps to properly prepare the swim spa for winter.
Addressing power issues and system faults.
General| Jet Count | 14 |
|---|---|
| Heater | 4 kW |
| Shell Material | Acrylic |
| Voltage | 240V |
| Filtration System | Self-Cleaning Filtration |
| Cabinet Material | Synthetic |
To Next Page