28
JET WATER FLOW ADJUSTMENT
Your Hydropool hot tub features adjustable water flow on
specific hydrotherapy jets. To reduce the flow: grasp the
outer flange of the jet, and turn clockwise approximately a
1/4 turn. When it hits the stop, the jet is considered closed,
and flow will be restricted. To increase the flow: from the
closed position, turn the jet counterclockwise approximately
1/4 turn. When it hits the stop, the jet is open, and there is
maximum jet flow. Do not attempt to turn the jet past the
stop, as this will unclip the jet internal from the socket.
JET AIR FLOW ADJUSTMENT
Your Hydropool hot tub features adjustable airflow on spe-
cific hydrotherapy jets. To stop the flow: push the toggle
button to the off position. When it hits the stop, the air is
closed, and airflow will be restricted. To turn on the flow:
push the toggle button to the on position. When it hits the
stop, the air control is fully opened. For maximum operating
efficiency, the air controls must remain closed when your hot
tub is not in use.
JET AND FEATURE OPERATION
Thigh Jet
Wide Stream Jet
BVK Ozone Jet Cluster Storm Cluster Storm Cluster Storm
Mini Storm
Galaxy Jet
Mini Storm
Massage Jet
Mini Storm
Multi Massage Jet
Mini Storm
Directional Jet
Poly Storm
Acupressure Jet
Poly Storm
Multi Massage Jet
Poly Storm
Rifle Jet
Power Storm
Resonator Jet
Power Storm
Rifle Jet
Power Storm
Twin Roto Jet
Ozone Cluster Jet
Hot Water
Return Jet
Corestream Jet
INTERCHANGING JET INSERTS
A great feature for custom tailoring the jets in your Hydro-
pool hot tub to suit your personal hydrotherapy needs.
Jets of like size and dimension may be interchanged with
each other, for example, if you wished to swap a Poly
Storm Directional jet for a Poly Storm Twin Roto jet, or a
Mini Storm Twin Roto jet for a Mini Storm Directional jet.
CLEANING STAINLESS STEEL JETS & CONTROLS:
Use a Cleaner such as Brasso or Stainless Steel Cleaner
to bring back the lustre to your Stainless Steel parts
weekly. This must be done otherwise the stainless steel
will discolor and possibly rust due to chemical exposure.
CLEANING OPTIONAL BELLAGIO
WATERFALL JETS
1 Put hot tub in Stand By Mode.
2 Rotate outer ring of Bellagio Jet Counter Clockwise to
remove cover.
3 Grab center nozzle, pull it out to clean and then rinse.
4 Reassemble in reverse order.
OPTIONAL BELLAGIO SEQUENCE FILTER
This filter must be cleaned at each drain and refill of your
hot tub to ensure proper functionality of the Acupressure
Sequence Massage. It is located behind the door in the
equipment area. To access the filter screen turn large
canister section of the assembly counter-clockwise till the
apparatus separates revealing screen filter. Run filter un-
der tap to clean out any debris and reassemble in reverse
order.
To Next Page
Loading...
