HyperX Pulsefire Haste User Manual

Document No. 480HMSH1-A-BK/G.A01
HyperX Pulsefire Haste
Page 5 of 6
Installation
Connect the USB connector to the computer.
Grip Tape
Optionally install the included grip tape for added control and comfort. Attach the grip tape for the left
and right mouse buttons with the pointed end facing the forward direction of the mouse.
Replacement Skates
Pulsefire Haste includes an extra set of PTFE skates in case the preinstalled skates are lost, damaged,
or worn.
1) Remove the damaged skate. Gently use a small flathead screwdriver or similar tool if needed.
2) Remove adhesive residue and debris from the mouse. A clean dry surface will provide optimal
adhesion.
3) Peel the replacement mouse skate from the backing paper and install on the mouse. Use
tweezers if needed.
4) Remove the protective film.
2
1
3
4
1
2
3
4

HyperX Pulsefire Haste Specifications

General

Material	Polytetrafluoroethylene (PTFE)
Form factor	Ambidextrous
Illumination	Yes
Product color	Black
Illumination color	Blue, Green, Red
Surface coloration	Monochromatic
Purpose	Gaming
Scroll type	Wheel
Sensor type	Pixart PAW3335
Buttons type	Pressed buttons
Polling rate	1000 Hz
Buttons quantity	6
Device interface	USB Type-A
Acceleration (max)	40 G
Mouse tracking speed	450 ips
Movement detection technology	Optical
Buttons durability (million clicks)	60
Number of movement resolution modes	4
Power source	Cable
Cable length	1.8 m
Package depth	182 mm
Package width	118 mm
Package height	60 mm
Package weight	168 g
Export Control Classification Number (ECCN)	-
Commodity Classification Automated Tracking System (CCATS)	84716070

Weight and Dimensions

Depth	124.2 mm
Width	66.8 mm
Height	38.2 mm
Weight	80 g