What to do if my Hypontech Inverter has a Permanent Fault?
If your Hypontech Inverter is showing a Permanent Fault, disconnect it from both the utility grid and the PV array. After the LED turns off, reconnect the inverter. If the fault continues to display, contact the service.
What to do if my Hypontech Inverter shows an Object Error?
If your Hypontech Inverter displays an Object Error, there are several things you can check: * Verify the grounding connection of the inverter is reliable. If the fault persists, contact service. * Inspect the AC cable and grid connection on the inverter. If the fault is still present, contact the service. * Check the grid voltage and grid usability. * Examine the fuse and the triggering of the circuit breaker in the distribution box. * Assess the grid voltage at the point of connection of the inverter. If the grid voltage is outside the permissible range due to local grid conditions, consider modifying the Fault monitored operational limits after informing the electric utility company first. * Check the grid voltage and grid connection on the inverter. * Check the grid freq...
Specifies the product's intended application and operational conditions.
Lists compliance with EU and Australian safety and EMC directives.
Highlights critical safety warnings for qualified personnel and supervision.
Explains the meaning of various safety and warning symbols on the device label.
Provides specifications and requirements for connecting the inverter to the AC grid.
Outlines the requirements and procedures for connecting the PV array to the inverter.
Lists essential electrical tests to perform before commissioning the inverter.
Details the mechanical checks required to ensure the inverter is waterproof.
To Next Page
General