What to do if my Hypontech Inverter has a Permanent Fault?
If your Hypontech Inverter is showing a Permanent Fault, disconnect it from both the utility grid and the PV array. After the LED turns off, reconnect the inverter. If the fault continues to display, contact the service.
What to do if my Hypontech Inverter shows an Object Error?
If your Hypontech Inverter displays an Object Error, there are several things you can check: * Verify the grounding connection of the inverter is reliable. If the fault persists, contact service. * Inspect the AC cable and grid connection on the inverter. If the fault is still present, contact the service. * Check the grid voltage and grid usability. * Examine the fuse and the triggering of the circuit breaker in the distribution box. * Assess the grid voltage at the point of connection of the inverter. If the grid voltage is outside the permissible range due to local grid conditions, consider modifying the Fault monitored operational limits after informing the electric utility company first. * Check the grid voltage and grid connection on the inverter. * Check the grid freq...
Details the proper applications and operating conditions for the HPS inverters.
Provides critical safety warnings for personnel and supervision of children.
Specifies environmental requirements and minimum clearances for inverter installation.
Step-by-step instructions for securely mounting the inverter using the provided bracket.
Details cable requirements and specifications for connecting the inverter to the AC grid.
Details the requirements and procedures for connecting the DC input to the inverter.
Step-by-step guide for assembling DC connectors, including cable preparation and crimping.
Instructions for safely connecting the PV array to the inverter, including polarity checks.
Lists essential electrical tests for grounding, voltage, polarity, and insulation before commissioning.
Outlines mechanical checks for inverter mounting, cover, and cable gland security.
Describes the inverter start-up procedure, including indicator lights and operational states.
General| Model | HPS-5000D |
|---|---|
| Rated Power | 5000 W |
| Max. DC Power | 5500 W |
| Input Voltage | 360 V |
| Max. DC Voltage | 550V |
| Start Voltage | 120 V |
| Number of MPPT Trackers | 2 |
| Max. Input Current per MPPT | 11 A |
| Number of DC Inputs per MPPT | 1 |
| Max. AC Power | 5000 W |
| Output Voltage | 230 V |
| AC Voltage Range | 180-280V |
| Frequency | 50/60 Hz |
| Rated Grid Frequency | 50/60 Hz |
| Power Factor | >0.99 |
| THDI | <3% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| Cooling | Natural Convection |
| Communication | RS485, Wi-Fi (optional) |
| Weight | 15 kg |
| Protection Features | Overvoltage, Overcurrent |
| Operating Temperature Range | -25°C to +60°C |
| Operating Temperature | -25°C to +60°C |
To Next Page
