Hypro 9910-D70 - User Manual

Hypro low pressure diaphragm pumps are recommended
for ground and low-level spraying of herbicides,
pesticides, liquid fertilizers and many other hard-to-
handle fluids. Low-cost maintenance and almost wear-
free operation make these pumps ideal for a wide variety
of spraying jobs. Pressure and output are designed for
optimum performance of medium to large-sized sprayers.
Hypro low pressure diaphragm pumps can be adapted for
splined shaft, hollow shaft, and solid shaft drive options.
Pumps include a pulsation dampener.
Description
Model 9910-D250
Max flow: 66 gpm
Max pressure: 290 psi
6 diaphragms
Model 9910-D160
Max flow: 42.5 gpm
Max pressure: 290 psi
4 diaphragms
Model 9910-D115
Model 9910-D115GR34
Max flow: 30.1 gpm
Max pressure: 290 psi
3 diaphragms
Model 9910-D135
Max flow: 34.8 gpm
Max pressure: 290 psi
3 diaphragms
Model 9910-D70
Model 9910-D70GR
Max flow: 19 gpm
Max pressure: 290 psi
2 diaphragms
Low Pressure Diaphragm Pumps
Form L-1381
Rev. B
HYPRO
®®
California Proposition 65 Warning -- This product and related accessories contain chemicals known to the
State of California to cause cancer, birth defects or other reproductive harm.
Installation, Operation, Repair and Parts Manual

Summary

Description

California Proposition 65 Warning

Warning about chemicals in the product known to cause cancer, birth defects, or other reproductive harm.

Drive Options

Control Units

General Safety Information

Installation

Troubleshooting

Hazardous Substance Alert

Maintenance Instructions for All Models

Diaphragm and Valve Replacement

Step-by-step guide for replacing diaphragm and valve components in the pumps.

Parts List for 9910-KIT1708, 9910-KIT1710 and 9910-KIT1711

Shaft Adapter Kit Installation

Instructions for installing female splined coupler kits and solid/male splined shaft kits.

Control Unit Description

Model 3300-0082 Installation

Steps for installing the 3300-0082 control unit, including connections and initial setup.

Model 3300-0087 and 3300-0088 Installation

Steps for installing the 3300-0087 and 3300-0088 control units, including mounting and connections.

Parts Illustration and List for Model 3300-0082

Parts Illustrations for Models 3300-0087 and 3300-0088

Parts List for Models 3300-0087 and 3300-0088

Parts Illustrations for Models 9910-D70 and 9910-D70 GR

Parts List for Models 9910-D70 and 9910-D70 GR

Parts Illustrations for Models 9910-D115, 9910-D115 GR34 and 9910-D135

Parts List for Models 9910-D115, 9910-D115 GR34 and 9910-D135

Parts Illustrations for Model 9910-D160

Parts List for Model 9910-D160

Parts Illustrations for Model 9910-D250

Parts List for Model 9910-D250

Pump Performance

Maintenance Schedule

Limited Warranty on Hypro;SHURflo Agricultural Pumps & Accessories

Return Procedures

Steps for returning products for service or warranty, including flushing, labeling, and RMA requirements.

Hypro 9910-D70 Specifications

General

Maximum Pressure	580 PSI
Maximum Fluid Temperature	140 °F
Pump Type	Diaphragm Pump
Diaphragm Material	Desmopan
Housing Material	Cast Iron
Weight	120 lbs
Power Source	Electric
Inlet Size	1-1/4" HB
Outlet Size	1/2" NPT (F)
Inlet Port	1-1/2" NPT
Outlet Port	1/2" NPT