To Next PageTo Next PageHow to fix HYT Two-Way Radio that won't turn on?
If your HYT Two-Way Radio won't power on, it might be due to a dead battery. Try recharging the battery or replacing it with a new one. Also, ensure the battery is correctly installed by removing it and re-attaching it.
What to do if I can't hear others on my HYT TC-700 Ex PLUS Two-Way Radio?
If you cannot communicate with your group members on the HYT Two-Way Radio, ensure that all radios are set to the same channel and have the same CTCSS/CDCSS settings. Also, make sure you are within the communication range of your group.
Why does my HYT Two-Way Radio battery drain so fast?
If your HYT Two-Way Radio's operating time is significantly shorter than usual, even after a full charge, the battery may be worn out and need replacing. Also, ensure the battery is fully charged; remove it from the charger only after the charger LED turns green.
What to do if my HYT TC-700 Ex PLUS Two-Way Radio has low transmitting volume?
If you experience no voice or low voice while transmitting on your HYT Two-Way Radio, ensure that the volume control knob is properly positioned. If the issue persists, it may be necessary to send the radio to your dealer for microphone examination.
How to stop hearing other groups on my HYT TC-700 Ex PLUS Two-Way Radio?
If you are hearing non-group members on your HYT Two-Way Radio, send the radio to your dealer to change your CTCSS/CDCSS settings, and ask your group members to do the same.
Why is there constant noise on my HYT TC-700 Ex PLUS?
If there is constant noise on your HYT Two-Way Radio, it may be because group members are too far away. Move within communication range and re-power on the radio.
General| Channel Capacity | 16 channels |
|---|---|
| IP Rating | IP67 |
| Intrinsically Safe | Yes |
| Frequency Range | 400-470 MHz |
| Output Power | 5W |
| Certification | ATEX, IECEx |
| Operating Temperature | -20°C to +60°C |
| Battery Life | Approx. 14 hours (5-5-90 duty cycle) |
Includes Emergency, Lone Worker, and Man Down functionalities for user safety.
Includes Time-out Timer, Busy Channel Lockout, and Battery Save features.
Solutions for the radio failing to power on.
