5
Basic Operations
If you want to… Do this…
Turn on/off the radio Press the On-Off key.
Increase the volume Press the Volume Up key.
Decrease the volume Press the Volume Down key.
Select a channel Rotate the Channel Selector knob.
Call Services
Call on Digital Channel
On the digital channel, you can initiate or respond to a group call or
private call. A group call is a call from an individual user to a group of
users. A private call is a call from an individual user to another individual
user.
Initiating a Call
1. Select the required channel.
2. Hold the radio vertically 2.5 to 5 cm from your mouth.
3. Hold down the PTT key and speak when the radio is in standby mode.
Receiving and Responding to a Call
When receiving a call, you can listen to it without any operation. You can
hold down the PTT key to respond within the preset time period.
Call on Analog Channel (Without Signaling)
A call on analog channel is from an individual user to all users on the
channel. The operations are the same as the call on digital channel.
To Next Page
Loading...
Need help?
General
