Hytera BD61 Series User Manual

13
Phenomena Analysis Solution
The radio in analog mode may be set
with no signaling.
Request your dealer to set signaling for all radios
operating at the same frequency, and make sure
that all members share the same signaling.
During reception,
you hear
too much
noise and hiss.
You may be too far away from other
members.
Move towards other members.
You may be in an unfavorable position.
For example, your communication may
be blocked by high buildings or
blocked in an undergound area.
Move to an open and flat area, restart the radio,
and try again.
It may be the result o
f external
disturbance (such as electromagnetic
interference).
Stay away from equipment tha
t may cause
interference.
The radio keeps
transmitting.
You may toggle the
PTT
/
VOX
switch
on the earpiece with VOX feature to
VOX
.
Reinsert the earpiece or switch to another channel.
You hear unclear
voice.
The signal is poor.
Make sure that call participants are
within the
communication range.
If the above solutions cannot fix your problems, or you may have some other queries, contact your dealer or the
Company for more technical support.

Hytera BD61 Series Specifications

General

Brand	Hytera
Model	BD61 Series
Category	Portable Radio
Language	English