Hytera E-pack100 - Fault Handling

12
Description Cause Analysis Solution
another channel
frequency.
Other E-pack100 have left the
communication coverage of
this E-pack100.
Confirm and return to the
communication
coverage.
E-pack100 antenna is in
abnormal connection
Check whether the
antenna is normally
connected.
Short communication
distance, and unclear
voice
The connection cable is
damaged and the signal
energy leaks.
Check the damage and
replace with new cable if
necessary.
Cable joint connected to the
antenna port is loose or
detached cable.
Check and tighten the
joint. Replace it with new
joint if necessary.
Transmit power is too low
Adjust the transmit power
to high power.
Cable is internal damaged.
Please replace it with a
new cable
Find the interference source,
and if unable to shut down or
stay away from it, please
apply for another channel
frequency.
Find the interference
source, and if unable to
shut down or stay away
from it, please apply for
another channel
frequency.