7
Receiving and Responding to a Private
Call
When you receive a private call, the radio will display
the icon
, then you can listen to it without any
operation. You can hold down the PTT key to call back
within the preset time. If you do not respond to it, the
radio will display appropriate indications.
Group Call
Initiating a Group Call
When you initiate a group call, the radio will display the
icon
. You can make a group call through any of
the following ways. The operation is similar to initiating a
private call.
Preset Contact
In the home screen, hold down the PTT key to initiate a
group call to the group call contact preset for the current
channel.
Contact List
Step 1
Go to “Menu -> Contact -> Contact List”.
Step 2
Use the
Up/Down
key to select an appropriate
contact.
Step 3
Hold down the
PTT
key to initiate a group call.
Manual Dial
The operation is the same as initiating a private call.
Receiving and Responding to a Group
Call
When you receive a group call, the radio will display the
icon on the LCD. You can hold down the PTT key
to call back within the preset time.
Call on Analog Channel (Without
Signaling)
To transmit on an analog channel, hold down the PTT
and speak into the microphone. To receive, release the
PTT key.
Please refer to the Feature Description and Operation
Manual along with the product for operation description
on how to make and receive calls on the analog channel
with signaling.
Emergency Call
In case of emergency, you can use Emergency Call to
ask for help from your companion or the control center.
Emergency Call needs to be congured and enabled by
your dealer. Please refer to the Feature Description and
Operation Manual along with the product for details.
Message Services
Message Services allow you to edit and send a new
message, to directly send a quick text message and to
forward the messages saved in the InBox, OutBox and
Drafts.
Text Message
Step 1
Go to “Menu -> Message -> New Msg” to
enter the relevant screen.
Step 2
Type the text and press the
OK
key. You can
save the text message to Drafts, or send it to a
private contact or a group contact directly.
Step 3
Select the contact or input the contact number
manually.
Step 4
Press the
OK
key to send the message. When
the message is sent successfully, the radio will
display the prompt “Send Success!”.
Quick Text
Quick Text is the frequently used message preset by
your dealer. You can send the quick text directly or edit
this text before sending it.
InBox
The Inbox saves the received messages and marks each
message with a corresponding icon to indicate its status.
●
: Read text message.
●
: Unread text message.
When the InBox is full, the radio will display the icon
, and the earliest message will be overwritten by
the latest one automatically.
OutBox
The OutBox saves the sent messages and marks each
message with a corresponding icon to indicate its status.
●
: The text message is sent successfully.
●
: The text message is not sent successfully. In
this case, you can resend it.
When the OutBox is full, the earliest message will be
overwritten by the latest one automatically.
Drafts
The Drafts saves the edited messages. When the Drafts
is full, the earliest message will be overwritten by the
latest one automatically. After the message in the Drafts
is sent successfully, it will be removed from the Drafts
and be saved into the OutBox. If not sent successfully,
the message will be saved into the Drafts and the
OutBox.
To Next Page
Loading...
Need help?
General
