14
For each message, you can choose to perform any of these
operations: Send, Save and Delete.
To delete all messages in the Drafts, select “Message -> Drafts
-> Delete All”.
Call Logs
To access this item, press the Menu key in the home screen and
then select “Call Logs”, or press the shortcut key for Call Logs
directly.
This radio can save up to 10 private call entries in the Outgoing/
Incoming/Missed list respectively. When the Outgoing/Incoming/
Missed list is full, the earliest entry will be overwritten by latest
one automatically.
After accessing a list and selecting an entry, you can perform
any of these operations: hold down the PTT key to initiate a call;
add it to Contact List; or delete it.
To delete all entries in the Outgoing/Incoming/Missed list at a
time, select “Call Logs -> Outgoing/Incoming/Missed -> Delete
All”.
Scan
To access this item, press the Menu key in the home screen and
then select “Scan”.
Scan On/Off
The Scan feature allows you to listen to communication activities
on other channels so that you can keep a close track of your
team members. This option is used to enable or disable the
function.
Scan List
You can request your dealer to create a scan list for each
channel. Each list may contain 32 channels at most (either digital
channel or analog channel is OK). After accessing the list, you
can perform any of the following operations:
Adding a Channel
To include a new channel into the active scan list.
Editing Priority Channel
To set the selected channel as a non-priority or as a priority
channel. If you are interested in activities on a channel, you can
set it as a priority channel, which will be scanned more frequently
than a non-priority channel.
Each scan list may contain two priority channels at most.
Menu Navigation
To Next Page
Loading...
