Hytera MD78X - Signaling Introduction: 5-Tone Decoding; 5-Tone Decoding Process

27
Group Call: ). If Auto Reset is enabled (by your dealer),
your radio will enter the Auto Reset mode after successful
encoding, with LED glowing orange, until the Auto Reset Time
expires.
Decoding:
Your radio can automatically decode the 5-Tone signaling when
receiving any matched one.
During decoding, the LED glows green. After successful
decoding, the LCD displays the contact information (or “Five
Tone Call”), an appropriate call icon (Private Call:
;
Group Call:
), and the decoded status message. If Auto
Reset is enabled (by your dealer), your radio will enter the Auto
Reset mode, with LED glowing orange, until the Auto Reset Time
expires.
Signaling Introduction