27
key during scan stay.
3. To exit the scanning process, you can select “Off” from the menu “Scan”, or press the programmed
Scan key again.
Talk Around
You can continue to communicate in DM mode by pressing the programmed Talk Around key, when your
repeater malfunctions, or when your radio is out of the repeater’s range but within talking range of other
radios.
Operation:
Press the programmed Talk Around key to switch between DM mode and RM mode.
Monitor
To adjust match conditions for signal receiving, you can enable the feature “Monitor”.
Operation:
Press the programmed Monitor key to enable the feature, and the radio displays the icon
. To
disable the feature, press this key again.
Hold down the programmed Monitor Momentary key to enable the feature, and the radio displays
the icon
. To disable the feature, release this key.
Squelch Off
If the feature “Squelch Off” is enabled, the speaker will keep unmuted no matter whether carrier is
present.
Operation:
Press the programmed Squelch Off key to enable the feature. Then the radio displays the icon
and sounds background noise. To disable the feature, press this key again.
Hold down the programmed Squelch Off Momentary key to enable the feature. Then the radio
To Next Page
Loading...
