To adjust match conditions for signal receiving, you can
enable the feature “Monitor”.
Operation:
Press the programmed Monitor key to enable the
feature, and the radio displays icon
. To disable the
feature, press this key again.
Hold down the programmed Monitor Momentary key
to enable the feature, and the radio displays icon
.
To disable the feature, release this key.
If the feature “Squelch Off” is enabled, your radio’s
speaker will keep unmuted no matter whether carrier is
present.
Operation:
Press the programmed Squelch Off key to enable the
feature. Then the radio displays icon
and sounds
background noise. To disable the feature, press this
key again.
Press the programmed Squelch Off Momentary key
to enable the feature. Then the radio displays icon
and sounds background noise. To disable the feature,
release this key.
Emergency
In case of an emergency, you can use the feature to
ask for help from your companion or control center. The
Emergency process has the highest priority. You can make
emergency operation even when your radio is transmitting
or receiving.
To enable the feature on a channel, an emergency system
must be assigned to the channel via the programming
software. In addition, the Emergency type and Emergency
mode are settable via the programming software.
Emergency Type
For each Emergency mode, there are four Emergency
types available. You can select one of them via your
dealer:
To Next Page
Loading...
Need help?
General
