icon will appear.
1. Transmitting a call to the preset contact
In the home screen, hold down the PTT key to transmit a Group Call to the Group Call cont
act preset for
the current channel.
2. Transmitting a call through Contact List
（1） Go to “Contact -> Contact List”.
（2） Use the Up/Do
wn key to select the Group Ca
ll contact you want to call.
（3） Hold down the PTT key to transmit the Group C
all.
Receiving and Responding to a Group Call
When a Group Call is received, your radio will display the icon
.
You may hold down the PTT key within the preset time period to call back.
All Call
Transmitting an All Call
Methods are the same as those in Transmitting a Group Call. When tra
nsmitting an All Call, the icon
will appear.
Note: You can transmit an All Call only when it is enabled by your dealer.
Receiving an All Call
When an All Call is received, your radio will display the icon
.
Note: You cannot respond to an All Call.
Calls on Analog Channels
To transmit on an analog channel, hold down the PTT and speak into the microphone. To receive, release
the PTT key.
19
To Next Page
Loading...
Need help?
General
