Functions and Operations
Home Screen
The feature allows you to quickly return to the previous menu or the home screen.
Operation:
In the editing screen, press the programmed Home Screen key, and the radio exits the screen and
returns to the previous menu immediately; in other screens, press the key, and the radio returns to the
home screen immediately.
Scan
This feature allows you to listen to communication activities on other channels so that you can keep a
close track of your team members.
Operation:
1. To enable the feature, you can select “On” from the menu “Scan”; or
Press the programmed Scan key in the home screen; or
Switch to a channel on wh
ich the feature “Auto Scan” is enabled via the programming software.
2.
After the feature is enabled, your radio will scan according to the scan list set for the channel on
which scanning starts. The scanning process is as follows:
z During scan
ning, the LCD displays the icon
, and the LED flashes orange slowly.
z When activities are detected on a channel, the radio will stay on the channel to receive current
activities. If your radio stay
s on a non-priority channel, the LCD will display the icon
; if on
Priority Channel 1 or Priority Channel 2, the LCD will display the icon
or respectively.
z If you don’t want to hear activities on the channel, press the programmed Nuisance Tempora
ry
Delete key to remove the channel from the scan list temporarily.
z If you want to continue staying on the channel, press the programmed Monitor or Squelch Off
key during scan stay.
3. To exit the scanning process, you can select “Off” from the menu “Scan”, or press the programmed
Scan key again.
27
To Next Page
Loading...
Need help?
General
