And when a call is received, the icon appears.
To exit the Emergency mode, long press the programmed Emergency key.
Note: Your dealer may set the number of alarm cycles and alarm duration (None), number of
polite retries and impolite retries (HDC1200), number of voice cycles, duration of each transmission and
TX interval.
Operation Method for Digital Emergency
Call Only
Operation:
1. Press the programmed E
m
ergency key to go to the Reve
rt Channel, and the radio displays the icon
.
2. If the feature “Alarm with Call to Follow” is enabled, you can speak into the microphone to make an
emergency call when the
radio displays the icon
.
3. When the icon
appears, you can receive. And when a call is received, the icon appears.
4. If the preset Voice Cycles expire, you can hold down the PTT key to make the emergen
cy call again
(the radio displays the icon
, with red LED glowing). After the emergency call is transmitted,
release the PTT key to receive (the radio displays the icon
, with LED flashing orange rapidly).
And when a call is received, the icon
appears.
To exit the Emergency mode, long press the programmed
Emergency key.
Note: Your dealer may set the number of voice cycles, duration of each transmission and TX
interval.
Battery Power Indicator
This feature allows you to know the current battery strength.
Operation:
Hold down the programmed Battery Strength In
dicator key, and the radio will give a specific indication
to represent the current battery strength. Release the key to exit.
Indication Battery Strength Icon Battery Strength
32
To Next Page
Loading...
Need help?
General
